Aller au contenu

Problème apache (redirection qui ne fonctionne qu'une fois sur 2)

mirage

Par mirage
dans Hébergement de Sites

 Partager

Sujets conseillés

mirage

mirage

Posté
Posté

Bonsoir,

J'ai un problème avec mon serveur Apache 2.2 sur Debian Etch (installé via les paquets Debian, Apache est à jour) : celui-ci empêche certaines redirections d'aboutir. Tout ça est aléatoire, ça ne le fait qu'une fois sur 2, sans raison apparente.

Je n'ai à priori rien modifié dans les fichiers de configuration ces derniers jours, je ne sais pas du tout d'où ça peut venir.

Un exemple : http://www.aeroweb-fr.net/aeroclubs/index.php (cliquez sur plusieurs des liens, vous verrez que sur certaines redirections, on revient sur la page précédente).

Voici mon apache2.conf :

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/apache2.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 60

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
	StartServers		  5
	MinSpareServers	   5
	MaxSpareServers	  10
	MaxClients		  150
	MaxRequestsPerChild   0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
	StartServers		  2
	MaxClients		  150
	MinSpareThreads	  25
	MaxSpareThreads	  75
	ThreadsPerChild	  25
	MaxRequestsPerChild   100
</IfModule>

User www-data
Group www-data

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
	Order allow,deny
	Deny from all
</Files>

TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

# Include generic snippets of statements
Include /etc/apache2/conf.d/

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Prod

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off

<IfModule alias_module>
	#
	# Aliases: Add here as many aliases as you need (with no limit). The format is
	# Alias fakename realname
	#
	# Note that if you include a trailing / on fakename then the server will
	# require it to be present in the URL.  So "/icons" isn't aliased in this
	# example, only "/icons/".  If the fakename is slash-terminated, then the
	# realname must also be slash terminated, and if the fakename omits the
	# trailing slash, the realname must also omit it.
	#
	# We include the /icons/ alias for FancyIndexed directory listings.  If
	# you do not use FancyIndexing, you may comment this out.
	#
	Alias /icons/ "/usr/share/apache2/icons/"

	<Directory "/usr/share/apache2/icons">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>

</IfModule>

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

	#
	# IndexOptions: Controls the appearance of server-generated directory
	# listings.
	#
	IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=*

	#
	# AddIcon* directives tell the server which icon to show for different
	# files or filename extensions.  These are only displayed for
	# FancyIndexed directories.
	#
	AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

	AddIconByType (TXT,/icons/text.gif) text/*
	AddIconByType (IMG,/icons/image2.gif) image/*
	AddIconByType (SND,/icons/sound2.gif) audio/*
	AddIconByType (VID,/icons/movie.gif) video/*

	AddIcon /icons/binary.gif .bin .exe
	AddIcon /icons/binhex.gif .hqx
	AddIcon /icons/tar.gif .tar
	AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
	AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
	AddIcon /icons/a.gif .ps .ai .eps
	AddIcon /icons/layout.gif .html .shtml .htm .pdf
	AddIcon /icons/text.gif .txt
	AddIcon /icons/c.gif .c
	AddIcon /icons/p.gif .pl .py
	AddIcon /icons/f.gif .for
	AddIcon /icons/dvi.gif .dvi
	AddIcon /icons/uuencoded.gif .uu
	AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
	AddIcon /icons/tex.gif .tex
	AddIcon /icons/bomb.gif core

	AddIcon /icons/back.gif ..
	AddIcon /icons/hand.right.gif README
	AddIcon /icons/folder.gif ^^DIRECTORY^^
	AddIcon /icons/blank.gif ^^BLANKICON^^

	#
	# DefaultIcon is which icon to show for files which do not have an icon
	# explicitly set.
	#
	DefaultIcon /icons/unknown.gif

	#
	# AddDescription allows you to place a short description after a file in
	# server-generated indexes.  These are only displayed for FancyIndexed
	# directories.
	# Format: AddDescription "description" filename
	#
	#AddDescription "GZIP compressed document" .gz
	#AddDescription "tar archive" .tar
	#AddDescription "GZIP compressed tar archive" .tgz

	#
	# ReadmeName is the name of the README file the server will look for by
	# default, and append to directory listings.
	#
	# HeaderName is the name of a file which should be prepended to
	# directory indexes.
	ReadmeName README.html
	HeaderName HEADER.html

	#
	# IndexIgnore is a set of filenames which directory indexing should ignore
	# and not include in the listing.  Shell-style wildcarding is permitted.
	#
	IndexIgnore .??* *~ *# RCS CVS *,v *,t
</IfModule>

<IfModule mod_mime.c>

	#
	# AddType allows you to add to or override the MIME configuration
	# file mime.types for specific file types.
	#
	#AddType application/x-gzip .tgz
	#
	# AddEncoding allows you to have certain browsers uncompress
	# information on the fly. Note: Not all browsers support this.
	# Despite the name similarity, the following Add* directives have
	# nothing to do with the FancyIndexing customization directives above.
	#
	#AddEncoding x-compress .Z
	#AddEncoding x-gzip .gz .tgz
	#
	# If the AddEncoding directives above are commented-out, then you
	# probably should define those extensions to indicate media types:
	#
	AddType application/x-compress .Z
	AddType application/x-gzip .gz .tgz

</IfModule>

<IfModule mod_negotiation.c>
	#
	# ForceLanguagePriority allows you to serve a result page rather than
	# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
	# [in case no accepted languages matched the available variants]
	#
	ForceLanguagePriority Prefer Fallback

</IfModule>

<IfModule mod_mime.c>
	#
	# Specify a default charset for all pages sent out. This is
	# always a good idea and opens the door for future internationalisation
	# of your web site, should you ever want it. Specifying it as
	# a default does little harm; as the standard dictates that a page
	# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
	# are merely stating the obvious. There are also some security
	# reasons in browsers, related to javascript and URL parsing
	# which encourage you to always set a default char set.
	#
	#AddDefaultCharset ISO-8859-1

	#
	# Commonly used filename extensions to character sets. You probably
	# want to avoid clashes with the language extensions, unless you
	# are good at carefully testing your setup after each change.
	# See [url="http://www.iana.org/assignments/character-sets"]http://www.iana.org/assignments/character-sets[/url] for the
	# official list of charset names and their respective RFCs.
	#
	AddCharset us-ascii	.ascii .us-ascii
	AddCharset ISO-8859-1  .iso8859-1  .latin1
	AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
	AddCharset ISO-8859-3  .iso8859-3  .latin3
	AddCharset ISO-8859-4  .iso8859-4  .latin4
	AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
	AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
	AddCharset ISO-8859-7  .iso8859-7  .grk .greek
	AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
	AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
	AddCharset ISO-8859-10  .iso8859-10  .latin6
	AddCharset ISO-8859-13  .iso8859-13
	AddCharset ISO-8859-14  .iso8859-14  .latin8
	AddCharset ISO-8859-15  .iso8859-15  .latin9
	AddCharset ISO-8859-16  .iso8859-16  .latin10
	AddCharset ISO-2022-JP .iso2022-jp .jis
	AddCharset ISO-2022-KR .iso2022-kr .kis
	AddCharset ISO-2022-CN .iso2022-cn .cis
	AddCharset Big5		.Big5	   .big5 .b5
	AddCharset cn-Big5	 .cn-big5
	# For russian, more than one charset is used (depends on client, mostly):
	AddCharset WINDOWS-1251 .cp-1251   .win-1251
	AddCharset CP866	   .cp866
	AddCharset KOI8	  .koi8
	AddCharset KOI8-E	  .koi8-e
	AddCharset KOI8-r	  .koi8-r .koi8-ru
	AddCharset KOI8-U	  .koi8-u
	AddCharset KOI8-ru	 .koi8-uk .ua
	AddCharset ISO-10646-UCS-2 .ucs2
	AddCharset ISO-10646-UCS-4 .ucs4
	AddCharset UTF-7	   .utf7
	AddCharset UTF-8	   .utf8
	AddCharset UTF-16	  .utf16
	AddCharset UTF-16BE	.utf16be
	AddCharset UTF-16LE	.utf16le
	AddCharset UTF-32	  .utf32
	AddCharset UTF-32BE	.utf32be
	AddCharset UTF-32LE	.utf32le
	AddCharset euc-cn	  .euc-cn
	AddCharset euc-gb	  .euc-gb
	AddCharset euc-jp	  .euc-jp
	AddCharset euc-kr	  .euc-kr
	#Not sure how euc-tw got in - IANA doesn't list it???
	AddCharset EUC-TW	  .euc-tw
	AddCharset gb2312	  .gb2312 .gb
	AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
	AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
	AddCharset shift_jis   .shift_jis .sjis

	#
	# AddHandler allows you to map certain file extensions to "handlers":
	# actions unrelated to filetype. These can be either built into the server
	# or added with the Action directive (see below)
	#
	# To use CGI scripts outside of ScriptAliased directories:
	# (You will also need to add "ExecCGI" to the "Options" directive.)
	#
	#AddHandler cgi-script .cgi

	#
	# For files that include their own HTTP headers:
	#
	#AddHandler send-as-is asis

	#
	# For server-parsed imagemap files:
	#
	#AddHandler imap-file map

	#
	# For type maps (negotiated resources):
	# (This is enabled by default to allow the Apache "It Worked" page
	#  to be distributed in multiple languages.)
	#
	AddHandler type-map var

	#
	# Filters allow you to process content before it is sent to the client.
	#
	# To parse .shtml files for server-side includes (SSI):
	# (You will also need to add "Includes" to the "Options" directive.)
	#
	AddType text/html .shtml
	AddOutputFilter INCLUDES .shtml
</IfModule>

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 [url="http://www.example.com/subscription_info.html"]http://www.example.com/subscription_info.html[/url]
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#	Alias /error/ "/usr/share/apache2/error/"
#
#	<Directory "/usr/share/apache2/error">
#		AllowOverride None
#		Options IncludesNoExec
#		AddOutputFilter Includes html
#		AddHandler type-map var
#		Order allow,deny
#		Allow from all
#		LanguagePriority en cs de es fr it nl sv pt-br ro
#		ForceLanguagePriority Prefer Fallback
#	</Directory>
#
#	ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#	ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#	ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#	ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#	ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#	ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#	ErrorDocument 410 /error/HTTP_GONE.html.var
#	ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#	ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#	ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#	ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#	ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#	ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#	ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#	ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#	ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#	ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

<IfModule mod_setenvif.c>
	#
	# The following directives modify normal HTTP response behavior to
	# handle known problems with browser implementations.
	#
	BrowserMatch "Mozilla/2" nokeepalive
	BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
	BrowserMatch "RealPlayer 4\.0" force-response-1.0
	BrowserMatch "Java/1\.0" force-response-1.0
	BrowserMatch "JDK/1\.0" force-response-1.0

	#
	# The following directive disables redirects on non-GET requests for
	# a directory that does not include the trailing slash.  This fixes a
	# problem with Microsoft WebFolders which does not appropriately handle
	# redirects for folders with DAV methods.
	# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
	#
	BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
	BrowserMatch "MS FrontPage" redirect-carefully
	BrowserMatch "^WebDrive" redirect-carefully
	BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
	BrowserMatch "^gnome-vfs/1.0" redirect-carefully
	BrowserMatch "^XML Spy" redirect-carefully
	BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
</IfModule>

#<IfModule mod_status.c>
	#
	# Allow server status reports generated by mod_status,
	# with the URL of [url="http://servername/server-status"]http://servername/server-status[/url]
	# Change the ".example.com" to match your domain to enable.
	#
	#<Location /server-status>
	#	SetHandler server-status
	#	Order deny,allow
	#	Deny from all
	#	Allow from .example.com
	#</Location>
#</IfModule>

#<IfModule mod_info.c>
	#
	# Allow remote server configuration reports, with the URL of
	#  [url="http://servername/server-info"]http://servername/server-info[/url] (requires that mod_info.c be loaded).
	# Change the ".example.com" to match your domain to enable.
	#
	#<Location /server-info>
	#	SetHandler server-info
	#	Order deny,allow
	#	Deny from all
	#	Allow from .example.com
	#</Location>
#</IfModule>

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

# ServerAdmin
ServerAdmin system_AT_agaw.eu

<IfModule mod_evasive20.c>
	DOSHashTableSize 3097
	DOSPageCount 2
	DOSSiteCount 50
	DOSPageInterval 1
	DOSSiteInterval 1
	DOSBlockingPeriod 10
	DOSLogDir "/var/log/apache2/mod_evasive"
</IfModule>

<Directory />
		AllowOverride All
</Directory>[/code]

Dans mon error.log, j'ai pu voir plusieurs fois ceci :

[code][Sat Sep 22 20:32:49 2007] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
[Sat Sep 22 20:32:49 2007] [notice] mod_python: using mutex_directory /tmp
[Sat Sep 22 20:32:49 2007] [notice] Apache configured -- resuming normal operations
[Sat Sep 22 20:33:39 2007] [notice] caught SIGTERM, shutting down
[Sat Sep 22 20:33:40 2007] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
[Sat Sep 22 20:33:40 2007] [notice] mod_python: using mutex_directory /tmp
[Sat Sep 22 20:33:40 2007] [notice] Apache configured -- resuming normal operations
[Sat Sep 22 20:35:19 2007] [notice] caught SIGTERM, shutting down
[Sat Sep 22 20:35:21 2007] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
[Sat Sep 22 20:35:21 2007] [notice] mod_python: using mutex_directory /tmp
[Sat Sep 22 20:35:22 2007] [notice] Apache configured -- resuming normal operations
[Sat Sep 22 20:35:39 2007] [warn] child process 3837 still did not exit, sending a SIGTERM
[Sat Sep 22 20:35:40 2007] [notice] caught SIGTERM, shutting down
[Sat Sep 22 20:35:41 2007] [notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
[Sat Sep 22 20:35:41 2007] [notice] mod_python: using mutex_directory /tmp
[Sat Sep 22 20:35:42 2007] [notice] Apache configured -- resuming normal operations

Je ne sais plus trop où chercher ou quoi faire, j'espère que Google ne va pas prendre cela comme du duplicate-content...

Bref, si vous aviez une idée, ce n'est pas de refus !

Merci par avance

mirage

mirage

Posté
  • Auteur
Posté

Bon et bien il semblerait que ce soit APC qui ait fichu le "bordel". En le désactivant, le problème ne se reproduit pas.

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
 Partager
Aller sur la liste des sujets
×
×
  • Créer...